How does stacking work

As others have said, stacking allows you to manage several switches with 1 IP address. You can stack models non-stack using the switchports as trunk ports but each switch will have a separate IP address. Cheaper than a if you do not need blades other than switch blades. You will need to order a longer stacking cable if the stack exceeds the length of the foot long stacking cable for the completion of the daisy chain from the last switch to the first switch in the stack.

You can operate the stack without the the final cable between first and last but you will not get the full backplane speed. In a stack scenario, what to do when one switch goes fail and LAN cable connected to that switch? Can any body help me?? Brand Representative for planIT Hardware. When the switch that your LAN cable is connected to fails, simply move the cable to another switch in the same stack--as long as all these switches are connected to the same VLAN virtual LAN you will be fine!

I have 5 48 port G switches stacked and love them. One goes out and the stack runs at half speed. It's a simple matter to swap out the bad one for another. They are pricey though unless you can use TechSoup like we do. I do have some older switches "stacked" via trunking, but luckily they have help up well over the years and I've never needed to replace them. I know this is an old thread, but it's the first one that came up when I searched for "how does stacking switches work.

My question is similar to Bhavesh's above. I've purchased an extra G to stack with my existing one for redundancy. If I stack these 2 switches adding switch 2 as a slave , what happens if Switch 1 fails ex. Does Switch 2 keep everything going including powering those ports on switch 1?

To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks. Stackable switches can be added or removed from a stack as needed without affecting the overall performance of the stack. Depending on its topology, a stack can continue to transfer data even if a link or unit within the stack fails. This makes stacking an effective, flexible, and scalable solution to expand network capacity.

All Cisco Business stacks have an Active switch , or commander. The Active switch is a switch in the stack that handles the configuration for the entire stack. When you want to manage your stack, the Active switch is the device that you connect to in order to make changes. The Active switch also handles other important stack functions, such as detecting when switches enter or leave the stack, and upgrading outdated switches.

The idea is that you can attack a learning problem with different types of models which are capable to learn some part of the problem, but not the whole space of the problem. So, you can build multiple different learners and you use them to build an intermediate prediction, one prediction for each learned model. Then you add a new model which learns from the intermediate predictions the same target.

This final model is said to be stacked on the top of the others, hence the name. Thus, you might improve your overall performance, and often you end up with a model which is better than any individual intermediate model. Notice however, that it does not give you any guarantee, as is often the case with any machine learning technique. Attention reader! Get hold of all the important Machine Learning Concepts with the Machine Learning Foundation Course at a student-friendly price and become industry ready.

Previous Stacking in Machine Learning. Next Decision Tree Introduction with example. Recommended Articles.